Top130+ Tool List | ITI Fitter Trade Tools List Name

(Industrial Training Institute) ITI Fitter Tool List

According to  NCVT Govt. Of India के द्वारा कुछ ऐसे टूल्स के बारे में आपको पता चलेगा जिसे आप यूज करते हैं परंतु आपको उनका नाम नहीं पता होगा और ऐसे भी कुछ टूल्स है। जिसका आपने कभी नाम भी नहीं सुना होगा।

ITI Fitter Tools List Name

Files Tool List

1. File wording 15cm smooth
2. File knife edge 15cm. smooth.
3. File cant saw 15cm. smooth.
4. File feather edge 15cm. smooth.
5. File triangular 15cm smooth.
6. File round  20cm. second cut.
7. File square 15cm. second cut.
8. File square 25cm. second cut.
9. Feeler gauge 10 blades.
10. File triangular 20cm. second cut.
11. File flat 30cm. second cut.
12. File flat 20cm. bastard.
13. File flat 30cm. bastard.
14. File Swiss type needle set of 12.53File half round 25cm. second cut.
15. File half round 25cm. bastard.
16. File round 30cm. bastard.
17. File hand 15cm. second cut.
18. Card file

Measurement And GaugeTool List

1. Micrometer   0 – 2.5cm outside.
2. Micrometer 25 – 50 mm outside.
3. Micrometer   0 – 25 mm outside.
4. Micrometer 50 – 75 mm outside.
5. Micrometer inside 25-50mm with 25 mm test pcs.
6. Steel Rule 15cm with Metric Graduations
7. Rule steel 30cm. to read metric.
8. Rule steel 60cm.
9. Straight edge 45cm steel.
10. Dial vernier  caliper  0-200mm L.C. 0.05mm (Universal type).
11. Screw thread micrometer with interchangeable 0–25 mm.
12. Pitch anvils for checking metric threads
13. Depth micrometer 0–100mm 0.01mm.
14. Verniercaliper with thumb block 0 – 130 mm L.C. 0.02mm.
15. Vernier caliper 20cm.
16. Vernier height gauge 30cm.
17. Vernier bevel protractor.
18. Screw pitch gauge.
19. Wire gauge, metric standard.
20. Gauge Slip Johnson metric set.
21. Carbide wear block   1mm – 2mm.
22. Gauge snap Go and Not Go 25 to 50mm by 5mm set of 6 pcs.
23. Gauge plug single 3 ended   5 to 55 by 5mm. set pf 11 pcs.
24. Gauge telescopic upto 150mm.
25. Dial test indicator .01mm on stand.
26. Sine bar 125mm.8Sine bar 250mm.
27. Comparator stand with dial indicator LC 0.01mm.
28. Engineer’s try square (Knife-wedge) 150 mm blade.
29. Surface roughness comparison plates N1 – N12 grade.

Transformer Welding Tool List

1. Welding 300 amps. Continuous Welding Current, With All Accessories
2. Electrode holder.
3. Welding cable to carry 400 amps with flexible rubber cover.
4. Lugs for cable.
5. Earth clamps.
6. Arc welding table (all metal top)122cm.x12cm.x60cm with positioner.
7. Oxy-acetylene

Gas Welding Tool Equipment List

1. Regulator And Other Accessories.
2. Gas welding table with positioner.
3. Welding torch tips of different sizes.
4. Gas lighter.
5. Trolley for gas cylinders.
6. Chipping hammer.
7. Gloves (Leather).
8. Leather apron.
9. Spindle key for cylinder valve.
10. Welding torches 5 to 10 nozzele16Welding Goggles.
11. Welding helmet with colored glass.
12. Tip cleaner.

Hand Tools List

1. Try Square 10cm
2. Hacksaw frame 30cm
3. Dot punch 10 cm
4. Centre Punch 10cm 
5. Hammer ball peen 0.45 kg. with handle
6. Second Cut Flat File 25cm
7. Smooth Flat File 25cm
8. Half Round Second Cut 15cm File
9. Outside Caliper
10. Inside Caliper
11. Divider 15cm
12. Screw Driver
13. Straight Scriber
14. 3Caliper 15cm. spring.
15. 4Caliper 15cm. spring.
16. 5Caliper 15cm. hermaphrodite.
17. Flat Chisel 10cm
18. Safety goggles

TOTAL TOOLS INSTRUMENTS & GENERAL SHOP OUTFIT

1. Plat surface 45 x 45cm.CI/Granite
2. Marking table 91x91x122cm.
3. Universal scribing block 22cm.
4. V-Block pair 7cm and 15cm with clamps.
5. Square adjustable 15cm blade.
6. Angle plate 10 x 20cm.
7. Level Spirit 15cm metal.
8. Punch letter 3mm. set.
9. Punch number set of 3mm.
10. Punch hollow 6mm to 19mm set of 5.32Punch round 3 x 4mm set of 2.
11. Portable hand drill (Electric) 0 to 6mm.
12. Drill twist s/s 1.5 to 12 mm by 0.5 mm
13. Drill twist S/S 8 to 15mm by  1/2mm.
14. Taps and dies complete set in box B.A.
15. Taps and dies complete set in box with-worth.
16. Taps and dies complete set in box 3-18 mm set
17. Stone oil 15 x 5 x 2.5cm.
18. Stone carborandum  15 x 5 x 5 x 4cm.
19. Can oil 0.25 liters.
20. Pliers combination 15cm.
21. Iron soldering 350gm.
22. Lamp blow 0.55 liters.
23. Spanner whit-worth D.E. 6 to 26mm set of 10 pcs.
24. Spanner adjustable 15cm.
25. Interchangeable ratchet socket set with a 12mm driver, sized  10-32 mm set of 18  socket & attachments.
26. Box spanner set 6 – 25mm  in mm  set of 8 with Tommy bar.
27. Glass magnifying 7cm.
28. Clamp tool maker 5cm and 7.5cmset of 2.
29. Clamp ‘’C’’ 5cm.
30. Clamp ‘’C’’10cm.
31. Hand Reamer adjustable max. 9mm, 12mm, 18mm, set
32. Hand Reamer taper 4 – 9 mm set of 6 OR 4 -7 mm set of 4
33. Reamer parallel 12mm to 16mm set of 5.
34. Scraper flat 15cm.
35. Scraper 3 corner 15cm.
36. Scraper half round 15cm.
37. Chisel cold   9mm cross cut 9mm diamond.
38. Chisel cold 19mm flat
39. Chisel cold   9mm round noze.
40. Extractor stud EZY- out.
41. Set combination 30cm.
42. Drill twist T/S  6 to 25mm x 1.5mm
43. Drill chuck 12mm.
44. Pipe wrench 40cm.
45. Pipe wrench 30cm.
46. Pipe vice 100mm.
47. Adjustable pipe tap set BSP with die set cover pipe size 15,20,25,32, 38, 50 mm.
48. Wheel dresser  (One for 4 units).
49. Machine vice 10cm.
50. Machine vice 15cm.
51. Sleeve drill Morse.
52. Lathe tools H.S.S. tipped set.
53. Lathe tools bit 6mm x 75mm.
54. Lathe tools bit 7mm x 75mm.
55. Lathe tools bit 9mm x 85mm.

आज आपने पढ़ा सीखा ITI Fitter Tools List जिसमें Measurement And GaugeTool List, Files Tool List, Transformer Welding Tool List, Gas Welding Tool Equipment List, Hand Tools List के बारे में जाना जो आप शायद ही जानते थे। मैं उम्मीद करता हूँ. अपको यह टूल लिस्ट से संबंधित सभी जानकारी पढ़ कर अच्छा लगा होगा। आप नीचे कमेंट करके बताये की अपको कितने tools के बारे में नही पता था।इसके अलावा आप उन सभी मित्रो के पास इस पोस्ट को शेयर करे।